Eton G5 Using the Light, Using the External Shortwave Antenna Socket, STEREO/MONO Button

G5 OPERATION MANUAL

WORKING WITH MEMORY continued

3.While holding down the ERASE button (15), press the F1-7 button that you wish to erase. Note that the box surrounding the memory location disappears.

4.Release the ERASE button.

DELETING ALL MEMORY CONTENTS

Hold down the EDIT and SSB buttons simultaneously, then press RESET (2). This deletes the contents of all memory pages.

USING THE ATS MEMORY FEATURE

Auto Tuning Storage (ATS) automatically stores the strongest FM local stations into memory, starting with page 99 and continuing down- ward until all are stored, e.g. 99, 98, 97, etc.

To select and start ATS:

3.Hold down the F6 button for about 2 seconds, then release. Note that the last chosen mode flashes in the screen.

4.While the mode flashes,perform quick, short presses of the F6 button to select ATS, then press the PAGE/TIME (4) button.

5.Press the ￿ Auto Tuning button for about two seconds to start the ATS scan.

ATS NOTE: After the ATS scan, if too many memories are filled with static, try the scan again with the DX/LOCAL switch set in the LOCAL position.

8USING THE LIGHT

The light illuminates the display and buttons. There are three light modes.

Normal Mode: Pressing any button activates the light. The light automatically turns off after 15 seconds.

Always-On Mode: When powered by its AC adapter, the light remains always-on when the G5 is turned on.

Manual Light-On/Off Mode: If the light is off, pressing the LIGHT button (7) activates the light for 15 seconds. Pressing it again within 15 seconds turns the light off.

9 USING THE EXTERNAL SHORTWAVE ANTENNA SOCKET (45)

The external antenna socket is used to connect the G5 to advanced performance antennas using a 50 or 75-Ohm coaxial cable feed-line. There are many such antennas on the market today. Typing in ‘shortwave antennas’ on your favorite Internet search site will provide further information. Contact Eton Corporation if you have questions about such antennas.

10 STEREO/MONO BUTTON (8)

When listening to FM stations this switch selects stereo or monaural. Select stereo when using earphones. When not using earphones, it’s OK to leave it on stereo.In either case,if the FM signal is poor,selecting mono may improve it.

30 31