english
Assembly Instructions
Before assembling or using the exercise cycle , please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.
For Your Safety
■! ATTENTION! The crosstrainer should be used only for its intended purpose, i.e. for physical exercise by adult people.
■! ATTENTION! Any other use of the equipment is prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the equipment.
■Exercise has been designed in accordance with the latest standards of safety. Any features which may have been a possible cause of injury have been avoided or made as safe as possible.
■Incorrect repairs and structural modifications (e.g. removal or replacement of original parts) may endanger the safety of the user.
■Damaged components may endanger your safety or reduce the lifetime of the equipment. For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. Use only original KETTLER spare parts.
■If the equipment is in regular use, check all its components thoroughly every 1
■To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced reg- ulary (once a year) by specialist retailers.
■! ATTENTION! Instruct people using the equipment (in parti- cular children) on possible sources of danger during exercising.
■The device requires a supply voltage of 230V, 50 Hz. Connect the power cord with a grounded protective contact socket.
■! IMPORTANT! Do not under any circumstances carry out elec- trical repairs or alterations yourself. Always ensure that such work is done by a properly qualified electrician.
■! IMPORTANT! disconnect the apparatus from the mains before doing repair, maintenance or cleaning work.
■Do not use a multiple power socket for the running belt. If an extension cable is being used, ensure that it complies with the VDE regulations.
■Unplug the power cord of the device from the socket if not used for a longer period.
■Ensure that the power cable is not pinched and that
■All electric appliances emit electromagnetic radiation when in operation. Please do not leave especially
■Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. Incorrect or excessive exercise may damage your health!
■Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by
KETTLER.
■Always observe the general safety rules and precautions for working with electrical equipment.
■! ATTENTION! Before beginning your program of training, study the instructions for training carefully.
■Our products are subject to a constant innovative quality assurance. We reserve the right to perform technical modifications.
■In case of enquiry, please contact your KETTLER dealer.
■In choosing the location of the apparatus, ensure a sufficient safety distance from any obstacles. The apparatus must not be mounted in the immediate vicinity of main passageways (paths, doorways, corridors).
■For a comfortable training position please adjust the handlebar and- saddle position to your body height.
■! Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts).
■! WARNING! Heart rate monitoring systems can be imprecise. Excessive training may lead to serious health damage or death. If you feel giddy or weak, please stop the training imme- diately.
■! ATTENTION! If you lose the pulse signal, the performance of the device will remain constant for approx. 60 seconds and is then slowly adjusted downwards. Please check your pulse mea- suring system (ear clip, hand pulse or chest belt) so that the pulse signal of the electronics can be entered again.
Handling the equipment
■Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled.
■It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc.). This may cause corrosion.
■The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly.
■The exercise cycle complies with the DIN EN 957 - 1/- 5 class HA.
■Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit.
■A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe.
■The exercise cycle has a electromagnetic brake system.
■The equipment is independent of revolutions per minute.
■Please ensure that liquids or perspiration never enter the machine or the electronics.
■Before use, always check all screws and
■Always wear suitable shoes when using.
4