3.9PEDALS
Tools: 15mm Open End Wrench
Locate the RIGHT PEDAL (EE) (marked with an "R") and PEDAL STRAP 
(FF) (marked with an "R"). With the side of the PEDAL STRAP marked with 
an “R” facing upward, slide the slotted end of the PEDAL STRAP through
the left slot in the PEDAL. Fasten one of the slots onto the tab located under the left slot of the PEDAL. Bend the PEDAL STRAP upward and slide the remaining end of the PEDAL STRAP through the right slot in the PEDAL and into the strap adjustment clip.
The PEDAL STRAP should securely engage the strap adjustment clip.
Install the RIGHT PEDAL (EE) to the USER RIGHT CRANK ARM (GG). Repeat for the LEFT PEDAL (marked with an "L") and PEDAL STRAP (marked with an "L").
Note: The LEFT PEDAL has reverse threads.
Note: Pedals need to be securely tightened or clicking may occur.
3.10 C1 WATER BOTTLE HOLDER & BRACKET
Parts: Hardware Bag #5 (2, 12mm Small Head Phillips Screws)
Tools: Phillips Screwdriver
Locate the WATER BOTTLE BRACKET (HH). Secure the WATER BOTTLE
BRACKET to the underside of the MONOCOLUMN (E) using two 12 mm
SMALL HEAD PHILLIPS SCREWS (16). Tighten the screws securely.
Insert the WATER BOTTLE (JJ) into the WATER BOTTLE BRACKET.
14