Stamina Products 55-1725 owner manual Assembly Instructions

Page 11

ASSEMBLY INSTRUCTIONS

STEP 10

Install four AA batteries into the METER(33). Four batteries are included. See page 14 for detailed battery installation instructions. Connect the SENSOR CONNECTION WIRE(34) and the CONTROL WIRE(98) to the EXTENSION WIRES on the METER(33). Push the excess wires back into the UPRIGHT(6). Attach the METER(33) to the plate on the UPRIGHT(6) with ROUND HEAD SCREWS(M5x0.8x15mm)(77).

CAUTION: Be careful not to damage the WIRES(34, 98) when attaching the METER(33).

11

Image 11
Contents Stamina Products This Product is Produced Exclusively byTable of Contents Safety Instructions800 Call US FirstCross Trainer 1725 Elliptical Before YOU BeginEquipment Warning & Notice Labels Part No. and Description Qty Hardware Identification ChartStep Assembly InstructionsAssembly Instructions Assembly Instructions UPRIGHT6 Assembly Instructions Function Inspection SET UP InstructionsExercise Workout Operational Instruction Load AdjustmentFunction Buttons Using the Fitness Monitor or MeterHOW to Install and Replace Batteries Operational InstructionsStorage MaintenanceTarget Heart Rate Zone Estimated by Age Conditioning GuidelinesDo not Bounce WARM-UP and COOL-DOWNFront Product Parts DrawingPart Name Parts ListPart Name QTY Warranty Limited WarrantyPage Stamina Products, Inc Box Springfield, MO FAX/MAIL Ordering Form