Moose Rack Instructions
Contents:
(2) Band Clamps
(4)M5 Socket Head Screws
(4)Washers
(2)Lock Nuts
Tools Required: 4mm Hex Key Wrench 5mm Hex Key Wrench
Moose Rack Instructions
Contents:
(2) Band Clamps
(4)M5 Socket Head Screws
(4)Washers
(2)Lock Nuts
Tools Required: 4mm Hex Key Wrench 5mm Hex Key Wrench
Installation Instructions
1.Using washers and socket head screws, attach bottom of rack to holes in bicycle dropouts.
2.Position top of rack parallel to the ground. Check distance from stay mounting hole on Moose Rack to the bicycle’s seat stays. Figure 1
WARNING
RACK MUST BE LEVEL. WHEN PULLING A TRAILERCYCLE, A
3. Adjust rack stays to fit. Photo 1
AB
figure 1: The difference between heights A & B must be less than 3/4” (19.05 mm)
Installation Instructions
1.Using washers and socket head screws, attach bottom of rack to holes in bicycle dropouts.
2.Position top of rack parallel to the ground. Check distance from stay mounting hole on Moose Rack to the bicycle’s seat stays. Figure 1
WARNING
RACK MUST BE LEVEL. WHEN PULLING A TRAILERCYCLE, A
3. Adjust rack stays to fit. Photo 1
AB
figure 1: The difference between heights A & B must be less than 3/4” (19.05 mm)
Rack
Stays
Rack
Stays
PHOTO 1 | PHOTO 1 |