Using the camera / video adapter

Before using the (optional) adapter, remove the rubber eyepiece carefully.

The adapter (Fig. 5) consists of 2 rings:

a)Camera adapter is 52x0.75mm. It fits the filter lens thread of various cameras, e.g. Nikon.

b)Video adapter is 37x0.75mm. It fits Sony cameras and some others.

FIGURE 5

Camera / Video adapter

If our adapter does not fit your camera from a camera supply store, obtain proper step up / step down rings.

Using the helmet mount

The Unit can be equipped with an optional NVS H Mount which fits a variety of existing helmet models.

The Unit is fixed to the mount via a locking screw (1, Fig.

6). To adjust the position of the Unit to your eye level, use the mount binding screw (4, Fig. 6). To adjust the eye relief first loosen locking screw and set a comfortable distance between the eyes and the eyepiece; then tighten the locking screw.

The Unit can be fixed in three predetermined positions: vertical, horizontal, and 15-20° above horizontal. Although the relative angles between these positions cannot be changed, the starting point can be adjusted using the flip-up adjustment screws (3, Fig. 6). If you loosen them, you can rotate the flip-up mechanism to