JVC CA-MXJ787V, CA-MXJ777V manual Playing Back Audio CDs

Playing Back Audio CDs

English

Placing CDs

1 Press 0 e for the disc tray (CD 1 to 3) you want to load a CD onto.

The unit automatically turns on and the disc tray comes out. The Powered Rolling Panel also opens automatically.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

Playing Back the Entire Discs — Continuous Play

You can play CDs continuously.

1 Place CDs.

2 Press one of the disc number buttons								CD3
(CD 1, CD 2, and CD 3) r, 1 for the								CD2
disc you want to play.
CD play starts from the first track of the selected								CD1
disc.
		Tracks of the currently playing disc
		1	2			3
			1	2	3		4
			5	6	7		8
			9	10	11		12
			13	14
	Track number	Elapsed playing time

•Pressing CD 6 y, _ instead of the disc number buttons starts playing back if a CD is in the trays.

3 Press the same 0 e you have pressed in step 1.

The disc tray closes, and the corresponding disc number indicator (CD 1 to CD 3) lights up on the display.

4 Repeat steps 1 to 3 to place other CDs.

When placing more than one CD continuously

When you press 0 e for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.

NOTE: When placing another CD, wait until current CD playing or stop playing.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number	1	2	3
Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator flashes while the corresponding CD is being played.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

To stop during play, press 7 z, +.

To remove the disc, press 0e for the corresponding disc tray.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD 1 is pressed : CD 1 ] CD 2 ] CD 3 (then stops)

•When CD 2 is pressed : CD 2 ] CD 3 ] CD 1 (then stops)

•When CD 3 is pressed : CD 3 ] CD 1 ] CD 2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press 0 e corresponding to a CD, not playing or selected currently, to eject and exchange the CD.

If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.

To stop play for a moment

Press CD 6 y, _.

While pausing, the elapsed playing time flashes on the display.

To resume play, press CD 6y, _ again. C D

10

Continued

EN6-17;MX-J777V/PM6 10 7/8/99, 9:16 AM