Newcon Optik LRF MOD 4EC operation manual Measurement procedure

Page 14

The correspondence between the pressing of the buttons and the signals sent via RS-232 is described in Interconnectivity, chapter 7.

The rest of this manual describes measurement procedures and setting measurement parameters through pressing of the buttons.

Measurement procedure

When the Module is off the LCD is blank. To activate it press and hold for one second the Action (A) button. At start the module comes into the Ready to Measure mode indicated by the word ‘READY’ on the display.

Pressing the Action button in the Ready to Measure mode initiates measurement. The result of the measurement is displayed in a form that depends on the measurement parameters (see Setup Mode).

Note:

ƒIf more than one parameter is chosen to measure, e.g. distance and azimuth, the results will replace each other on the display every half a second.

ƒIf the target is located below the unit the result of vertical measurement (elevation or height) will be preceded with minus (“-“) sign.

ƒIf results of angular measurements can not be interpreted by the unit an error codes 444 (for azimuth) or 99 (for elevation) will be displayed. Repeat the measurement. If error codes appear again – reboot the unit by switching it off and on again.

11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Laser Range Finder Module LRF MOD 4EC Page Important Information Read prior to activationContents Best Measuring Technique Brief Description Key Features Principle of workDevice Appearance MOD 4EC general viewPage Standard delivery set Optional accessoriesDelivery SET Speed measurement SpecificationsRange Finder Compass and inclinometer MOD 4EC onlyEnvironmental PowerInterface MechanicsModule controls Operation InstructionsMaximum distance Measurement procedure Target selection logic Individual Measurement and Scanning regimesOperation and service modes Mode switching and tuning PLGr Setup mode ReadyCd3 REc Compass calibration Interface formatGating mode Data Recall mode Or M Display test modeAdditional display information KMH orBest Measuring Technique Page Connecting to computer Data output protocolPage Additional communication features, for special orders only Output, Hex Output, Ascii LRF menu Position Output connector pin layout and cable diagram Cable diagram GPS interconnectivityPage Storage and Maintenance Troubleshooting Black dots are visible on LCDWarranty What This Warranty Does Not CoverCustomer Support Quality Certificate MOD 4ECNewcon Optik

LRF MOD 4EC specifications

The Newcon Optik LRF MOD 4EC is an advanced laser rangefinder that exemplifies cutting-edge optical technology and rugged design, tailored for various outdoor applications, including military, hunting, and sporting activities. It stands out in the market due to its impressive features that enhance precision, reliability, and user experience.

At the core of the MOD 4EC is its powerful laser rangefinder, capable of measuring distances up to 4,000 meters with exceptional accuracy. This long-range capability is a significant advantage for users requiring precise measurements over extended distances. The unit employs a Class 1 eye-safe laser, ensuring both safety and compliance with regulations while maintaining high performance.

The MOD 4EC integrates advanced LED display technology, providing clear and easy-to-read information even in low-light conditions. This feature ensures that users can quickly access range information without straining their eyes, making it an invaluable tool during critical moments. Additionally, the display includes various measurement modes, including standard mode, scan mode, and height measurement, catering to the diverse needs of users.

One of the key characteristics of the Newcon Optik LRF MOD 4EC is its robust construction. The device is designed to withstand harsh environmental conditions, featuring water-resistant and shockproof properties. This durability makes it ideal for outdoor enthusiasts and professionals who require reliable equipment that can endure the rigors of the field.

The MOD 4EC also boasts a compact and lightweight design, facilitating easy transportation and handling. Its ergonomic body and intuitive controls allow for seamless operation, ensuring that users can focus on their task without distractions.

Furthermore, the rangefinder is equipped with advanced optics, delivering superior light transmission and clarity. The multi-coated lenses enhance visibility and ensure crisp images, even in challenging lighting conditions.

In conclusion, the Newcon Optik LRF MOD 4EC combines cutting-edge technology, robust construction, and user-friendly features, making it an excellent choice for anyone in need of a reliable and accurate laser rangefinder. Whether for professional use or outdoor recreation, the MOD 4EC delivers performance and durability that users can depend on in any environment.
Top Page Image Contents