E P 1 Orange BAG, E P 4 Green BAG | Vision Fitness X6750HRT specs

S T E P 1 ORANGE BAG

•Place a piece of packaging under the front of the unit to aid in assembly of the front foot.

•Secure the front stabilizer tube to the base frame plate with four socket head bolts (M8x20L) and four arc washers (8.2x18x1.5T). Tighten with the 6mm L-shaped wrench.

•Remove the packaging from under the front of the unit.

S T E P 2

BLUE BAG

Knuckle Bracket

S T E P 2

S T E P 4 GREEN BAG

•Remove protective covers from sleeves of the pedal arms.

I M P O RTA N T: The washers in the following step must be assembled in the correct order.

S T E P 1

• Slide one thin metal wave washer

(26x36x0.3T), one flat washer (25.5x38x1T), and one plastic wave washer (26x36x2T) onto the axle of the right link arm. Slide the axle of the right link arm through the sleeve on the right pedal arm. Secure the link arm onto the pedal arm with the plastic wave washer (26x36x2T), end cap, and bolt (M8x12L). Tighten with the 5mm L-shaped wrench.

• Repeat the step on the left side.

•Take the right pedal arm and set the roller wheel in the aluminum guide track. Slide the opposite end of the pedal arm into the U-shaped knuckle bracket. Slide a socket head bolt (M10x55L) with a washer (10x24.5x1T) through the hole in the knuckle bracket and pedal arm. Fix in place with a washer (10x24.5x1T) and nylon nut (M10). Tighten with the 8mm L-shaped wrench and the 17mm wrench.

•Slide the pedal arm cover over the knuckle joint and fix in place with a bolt (M5x12L). Tighten with the screwdriver.

•Repeat these steps on the left side.

S T E P 3

PINK BAG

•Slide the console mast boot onto the console mast.

•Attach the mounting plate to the bottom of the console mast with four socket head bolts (M10x25L) and four lock washers (M10). Tighten as much as possible with the 8mm L-shaped wrench.

•Mount the console mast on the frame by sliding the guide hole on the mast mounting plate over the guide screw on the front of the frame bracket. Place a lock washer (M8) followed by a flat washer (8x16x2T) on each of the four remaining socket head bolts (M8x25L). Insert the bolts to the rear holes but do not completely tighten. Next, insert the bolts to the front holes. Tighten all four bolts as much as possible with the 6mm L-shaped wrench.

•Wrap the wire tie that exits the hole at the bottom front side of the console mast around the wire harness coming up from the frame. Pull the wire tie and wire harness up through the top of the console mast.

•Insert a zip tie through the hole in the middle of the console plate and loop it around the heart rate wires and wire harness. Pull to snug, but do not over tighten.

Console Plate
	Console Mast
	Console Mast
	Boot
S T E P 3	Frame Bracket
Mounting Plate

End Cap	Plastic Wave
	Washer

Plastic Wave

Washer

Flat Washer

Thin Metal

Wave Washer

	Pedal Arm
S T E P 4	Link Arm

Front Stabilizer Tube	S T E P
Front Stabilizer Tube
Console

S T E P 6

Accessor y Tray

Rotation

Housing

S T E P

Dual - Action

Arm

S T E P 5

BLACK BAG

N O T E : With this next step it is helpful to have a second person to hold the dual-action arms in place while you assemble them.

•Take the right dual-action arm and center the holes in the rotation housing on the console mast. Secure with four socket head bolts (M8x25L) and four lock washers (M8). Tighten with the 6mm T-shaped wrench.

•Attach the dual-action arm rotation cover to the dual-action arm center. Secure in place with two bolts (M5x15L). Tighten with the screwdriver.

•Slide a spacer onto each side of the socket joint located on the end of the link arm. Slide the bottom of the dual- action arm bracket over the link arm socket and spacers. From the outside of the bracket, slide the bolt (M8x55L) through the hole in the bracket and socket joint. Secure with a washer (8x16x1T) and nylon nut (M8). Tighten with the 6mm T-shaped wrench and 13mm wrench.

•Attach the inside dual-action arm cover onto the bottom of the dual- action arm with a bolt (M5x15L). Insert the plastic connector to the inside dual-action arm cover. Slide the outside dual-action arm cover onto the other end of the plastic connector. Secure the outside dual-action arm cover to the bottom of the dual-action arm with a bolt (M5x15L). Tighten both bolts with the screwdriver.

•Repeat these steps on the left side.

YELLOW BAG

•Slide the accessory tray onto the console mast. Secure in place with four panhead bolts (M8x20L). Tighten with the 5mm L-shaped wrench.

•Remove the four bolts (M5x12L) from the back side of the console. Connect the data cable and the heart rate wires to the plugs in the back side of the console. Place the console on the mast and secure in place with the bolts (M5x12L).

•Place the X6750HRT in its intended location and plug in the power cord to the electrical outlet.

X6750HRT specifications

The Vision Fitness X6750HRT is a state-of-the-art treadmill designed for individuals seeking a premium running experience at home. This model focuses on delivering impressive performance, durability, and an array of features that cater to every user's needs. With its sleek design and robust construction, the X6750HRT promises to elevate your workout sessions and assist you in achieving your fitness goals.

One of the standout features of the X6750HRT is its powerful 3.0 continuous duty horsepower motor. This motor provides smooth and quiet operation, supporting speeds of up to 12 miles per hour. Its incline capability goes up to 15%, which enables users to incorporate challenging hill workouts into their routines, enhancing cardiovascular fitness and calorie burning.

The treadmill features a spacious running surface measuring 20 inches by 58 inches, allowing for comfortable movement during workouts. The Flex Deck cushioning system reduces impact on the joints, making it suitable for people of all fitness levels, especially those with a history of injuries. This technology not only enhances comfort but also minimizes the risk of injury during high-intensity sessions.

Equipped with a multi-window LED display, the X6750HRT provides users with essential workout metrics such as time, distance, calories burned, speed, and heart rate. The heart rate monitoring system is particularly noteworthy; it includes grip sensors on the handlebars and is compatible with wireless chest straps, allowing for accurate heart rate tracking during workouts. This feature encourages users to maintain their target heart rate zones for optimal training efficiency.

The treadmill is also fitted with built-in workout programs, offering a variety of pre-set routines ranging from fat burn to performance enhancement, accommodating all fitness levels. These programs keep workouts engaging and cater to users looking to challenge themselves over time.

Additionally, the Vision Fitness X6750HRT integrates modern technology, featuring Bluetooth connectivity that allows users to sync their fitness apps and track their progress over time. It also includes a USB charging port and built-in speakers, providing entertainment options to make workouts more enjoyable.

In conclusion, the Vision Fitness X6750HRT is a versatile and highly functional treadmill packed with features that cater to serious fitness enthusiasts. Its robust motor, cushioned deck, advanced heart rate monitoring, and modern connectivity options make it an excellent addition to any home gym. Whether you're walking, jogging, or training for a marathon, this treadmill is designed to help you meet your fitness aspirations.