Vision Fitness X6600HRT/DA manual E P 1 O R a N G E B a G

S T E P 1 O R A N G E B A G

• Install	the	left	and	right	S T E P 1
stabilizers	with	the four	arc-shaped
washers (M8) and four bolts				(M8 x

20), using the Blue 5MM Allen wrench.

• Cover both stabilizers with the included rubber boots.

S T E P 2	B L U E B A G
	• Slide the console mast cover onto	S T E P 2
	the console mast.

• Unfold the console cable and attach it to the string located inside the console mast. Guide the wire up through the mast while simultaneously sliding the console mast onto the frame bracket.

• Attach the console mast cover to the frame using four screws (M4 x 12).

• Bolt the mast to the frame with the two bolts (M8 x 75), using the 5MM Blue-handled Allen wrench. Make sure these are tight!

• Attach the console mast cover plate with the V-head screw (M3 x 10).

5