Install Console Mast and Water Bottle Holder

Step 3: Install Console Mast and Water Bottle Holder

•Main Unit (from Step 2)

•#4 - Water Bottle Holder

(Two parts: (4a) outer ring, (4b) - base)

•#6 - Console Mast (Qty. 1)

•#21 - Mast Boot (Qty. 1)

Hardware

•#24 - M8 Flat Washer (Qty. 5)

•#25 - M8 Lock Washer (Qty. 5)

•#26 - M5x25 Phillips Head Screw (Qty. 2)

•#29 - M8x15 Hex Screw (Qty. 5)

3-1Put the Console Mast into the Mast Boot.

3-2Connect the wire harness (W1) from the Main Unit to the wire harness (W2) in the Console Mast.

3-3Move the Console Mast down on the Main Unit. Secure the Console Mast with the hardware shown.

NOTICE: Do not pinch the wires when putting the Console Mast on the Main Unit.

3-4Move the Mast Boot down to the Main Unit.

3-5Attach the Water Bottle Holder to the Console Mast with the hardware shown.

Tools

• Phillips Head Screwdriver

Assembly Manual