Blue BAG

S T E P 2

S T E P 2

R2200HRT

R2200

• Place the seat bracket on the seat frame. Secure in place with four (M8x20) socket-head cap screws. Tighten with the 6mm L-shaped wrench.

• Remove the socket-head cap screw in front of the seat lever, located on the right side of the seat frame, with the 4mm L-shaped wrench. Line-up the seat lever into position on the bracket. Reinsert the socket-head cap screw and tighten with the 4mm L-shaped wrench.

• Take the seat frame handlebar and connect the heart rate wires (A) exiting its center to the heart rate wires (B) com- ing from the seat frame.

• Mount the seat handlebars to the seat frame with four screws (M8x15L) and four lock washers (M8). Tighten with the 5mm allen wrench.

• Mount the seat backrest cushion to the seat frame with four screws (M6x55L) and four lock washers (M6). Tighten with the 4mm L-shaped wrench.

• Mount the seat bottom cushion to the seat frame with four screws (M6x55L) and four lock washers (M6). Tighten with the 4mm L-shaped wrench.

R2200HRT ONLY: Snap the plastic cover onto the rear of the seat back.

Seat Bracket

Seat Frame

Seat Lever