JVC CA-UXL46V, CA-UXL36V CD Direct Recording One Track Recording, To stop while recording, press

REV.MODE

REV. MODE

On the unit

(only for UX-L36V)

English

CD Direct Recording One Track Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program Play.

This recording method is convenient when you record tracks while playing the CD. You can only record your favorite songs on the tape.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

2 Load a CD.

•If the current playing source is not the CD player, press CD 3/8, then 7 before going to the next step.

—If you do not want pauses of about 4 seconds recorded between selections, press CD 3/8 twice. Otherwise, non-recorded pause will be automatically recorded between selections.

•If you want to record on both sides of a tape, see “To record on both sides—Reverse Mode.”

3 Press REC (recording). REC

The REC (recording) indicator lights up on the display and recording starts.

After recording, the CD player and cassette deck automatically stop.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 PUSH OPEN on the unit.

To record on both sides—Reverse Mode

Press REV.MODE (reverse mode) until

the indicator is lit.

•When using the Reverse Mode for CD Direct Recording, start recording in

the forward (3) direction first. When the tape reaches its end while recording a song in the forward

direction (3), the last song will be re- recorded at the beginning of the reverse side (2).

If you start recording on the reverse

side (2), recording will stop when recording is done only on one side (reverse) of the tape.

When making Sleep Timer settings while doing CD Direct recording

Set enough time to allow for the CD to finish playing; otherwise the power will go off before recording is completed.

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

2	Play the track on the CD you wish to record.
3	Press REC (recording).	REC

The CD player returns to the beginning of that track and the track is recorded on the tape.

After recording, the CD player and cassette deck automatically stop.

4 Repeat steps 2 and 3 to record other tracks you want.

To stop while recording, press 7.

The tape stops after 4 seconds.

To remove the cassette, press 0 PUSH OPEN on the unit.

– 25 –