5.Clean inside surface of shrouds around each set of locking tabs using the Wet Pad portion (Alcohol wipe), and then open the Dry Pad portion to wipe the area dry.
6.Install the adhesive tape around each locking tab as shown.
7.
3 |
|
| March 23, 2004 |
5.Clean inside surface of shrouds around each set of locking tabs using the Wet Pad portion (Alcohol wipe), and then open the Dry Pad portion to wipe the area dry.
6.Install the adhesive tape around each locking tab as shown.
7.
3 |
|
| March 23, 2004 |