8.Slide the Roller Bar through Holder Assembly, and then place a Round Cap onto each end of the Roller Bar. Slide the Round Caps against the Holder Assembly.
9.Slide a Roller Pad onto each end of the Roller Bar, followed by a Roller Cap. Place an Aluminum Cap on each end of the Roller Bar and tighten the set screws.
10.Tighten the set screws at the end of the Holder Assembly to secure the Roller Bar, then insert the Square Cap into the Holder Assembly.
11.Insert a Round Cap into each end of the Handlebar, and then slide the Handlebar through the Holder Assembly. Slide a Grip onto each end of the Handlebar, then secure the Handlebar to the Holder Assembly by tightening the set screws with a
Roller Bar |
Assemble the Unit, continued
page 10