JVC SP-MXJ700, SP-MXJ500 Maintenance, Troubleshooting, Handling discs, Handling cassette tapes

Page 26

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

•Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent — such as conventional record cleaner, spray, thinner, or benzine — to clean the disc.

Troubleshooting

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

• If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid the following places to store the

tape:

— In dusty places

— In direct sunlight or heat

— In moist areas

— Near a magnet

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Hard to listen to broadcasts because of noise.

The disc sound is discontinuous.

The disc tray does not open or close.

The disc does not play.

The cassette holders cannot be opened.

Impossible to record.

Operations are disabled.

Unable to operate the unit from the remote control.

Cause

Connections are incorrect or loose.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

The disc is scratched or dirty.

•The AC power cord is not plugged in.

•Trays are locked.

The disc is placed upside down.

Power supply from the AC power cord has been cut off while the tape was running.

Small tabs on the back of the cassette are removed.

The built-in microprocessor may malfunction due to external electrical interference.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

Action

Check all connections and make corrections. (See pages 6 to 8.)

•Reconnect the antennas correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend the FM antenna at the best position.

Clean or replace the disc. (See above.)

•Plug the AC power cord.

•Unlock the trays. (See page 15.)

Place the disc with the label side up.

Turn on the unit.

Cover the holes with adhesive tape.

Unplug the AC power cord and then plug it back in.

•Remove the obstruction.

•Replace the batteries.

– 23 –

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Instructions For U.S.A Instructions for safe use About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Become familiar with the buttons and controls on your unitSee pages in the parentheses for details Powered Rolling PanelDisplay Window Eject 0 button for deck B 16Fade Muting button AUX button Remote ControlRemote Control FM/AM button 9Unpacking Connecting Antennas Getting StartedTo connect an outdoor AM antenna Connecting SpeakersAM antenna For better reception of both FM and AMConnecting Other Equipment Common Operations Turning On or Off the PowerSetting the Clock Selecting the SourcesBass sound level can be adjusted in 4 steps Bass 1 Bass 3, Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundSurround modes Creating Your Own Sound Mode Manual ModeTo use your own sound mode SEA Sound Effect Amplifier modesTuning in a Preset Station Tuning in a StationPresetting Stations Listening to FM and AM BroadcastsPlaying Back the Entire Discs Continuous Play Playing Back CDsLoading CDs Basic CD OperationsPress CD £·8 Program PlayProgram other tracks you want Repeating Tracks or CDs Repeat Play To check the program contentsPlaying at Random Random Play Prohibiting Disc Ejection Tray LockLocating the Beginning of a Song Music Scan Playing Back TapesPlaying Back a Tape Recording a Tape on Deck B To record on both sides Reverse ModeRecording To protect your recordingButtons CD1 to CD3 to select the disc, then CD Direct RecordingDubbing Tapes Press DubbingPress Edit Auto Edit RecordingOn the unit only Load CDs Press SETUsing the Timers Using Daily TimerWhen selecting Tuner FM or Tuner AM Using Recording TimerWhen selecting CD Press 4or ¢to set the volume levelUsing Sleep Timer Timer PriorityTo clean the disc MaintenanceTroubleshooting Handling discsSpecifications HOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 1299MWMMDWJEM

SP-MXJ500, SP-MXJ700 specifications

The JVC SP-MXJ700 and SP-MXJ500 are compact audio systems designed to deliver a powerful audio experience in a stylish and space-saving package. With their sleek design and advanced technology, these systems are perfect for music enthusiasts and casual listeners alike, offering a blend of functionality and sound performance.

The SP-MXJ700 features a robust 2.1 channel speaker configuration, which includes dual stereo speakers and a subwoofer, delivering rich bass and clear highs. This makes it ideal for various genres of music, from thumping hip-hop beats to classical symphonies. The system is equipped with a built-in amplifier that ensures powerful sound output while maintaining clarity and fidelity across all audio ranges.

A key feature of the SP-MXJ700 is its versatility in playback options. The system supports multiple sources, allowing users to enjoy their music from different devices. It includes a CD player for traditional discs, a USB port for flash drives, and Bluetooth connectivity for streaming audio wirelessly from smartphones, tablets, and laptops. This wireless capability enhances convenience, allowing for seamless music playback without the hassle of cables.

The SP-MXJ500, while a step down from the 700 model, does not compromise on quality. It shares many of the same features, including a compact design and flexible playback options. With its 2.1 channel setup and a slightly lower power output, the SP-MXJ500 is perfect for smaller rooms or more intimate listening experiences.

Both systems come equipped with an equalizer function, enabling users to customize sound profiles according to their preferences. This feature allows for an enhanced listening experience, adapting to the acoustics of the room or personal taste in audio.

The design of the SP-MXJ700 and SP-MXJ500 is as appealing as their performance. Sleek and modern, they integrate well into any setting, whether it be a home office, living room, or bedroom. The compact footprint of these systems makes them easy to place without taking up excessive space.

In summary, the JVC SP-MXJ700 and SP-MXJ500 showcase advanced audio technology, versatility, and a modern aesthetic. Whether you choose the premium features of the SP-MXJ700 or the budget-friendly SP-MXJ500, both systems deliver impressive sound quality and user-friendly functionality, making them excellent choices for all audio lovers.
Top Page Image Contents