ProForm PFTL49392 user manual Trouble-Shooting, Symptom the Power does not Turn on, Top

Page 12

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

1.SYMPTOM: THE POWER DOES NOT TURN ON

a.Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.

b.After the power cord has been plugged in, make sure that the key is fully inserted into the console. See step 1 on page 9.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

c

Tripped

Reset

2.SYMPTOM: THE POWER TURNS OFF DURING USE

a.Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b.Make sure that the power cord is plugged in.

c.Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 9.

d.If the treadmill still will not run, please call our Customer Service Department, toll-free.

3.SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY

a.Check the batteries in the console. See BATTERY INSTALLATION on page 8. Most problems are the result of drained batteries.

b. Remove the key from the console and UNPLUG THE POWER CORD. Remove the screws from the hood. Carefully remove the hood. Locate the Reed Switch (44) and the Magnet (45) on the left side of the Pulley (50). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw (33) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

44

1/8”

50

 

 

 

 

 

45

33

 

 

Top

 

 

View

 

 

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents QUESTIONS? Model No. PFTL49392 Serial NoCustomer HOT Line Table of Contents Important PrecautionsPage Before YOU Begin Right SideBack Assembly Your own phillips screwdriverPage Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Battery InstallationSTEP-BY-STEP Console Operation Insert the key fully into the power switch Reset the speed controlAdjust the incline of the treadmill as desired Start the walking beltHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill SurfaceHOW to Lower the Treadmill for USE TROUBLE-SHOOTING Symptom the Power does not Turn onSymptom the Power Turns OFF During USE TopSymptom the Walking Belt Slows When Walked on Symptom the Walking Belt is OFF-CENTERHOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Remove this Exploded Drawing and Part List from the Manual Part LIST-Model No. PFTL49392 Key No. Qty DescriptionExploded

PFTL49392 specifications

The ProForm PFTL49392 treadmill is a versatile and feature-rich exercise machine designed to cater to a wide range of fitness enthusiasts. This model offers a blend of innovative technologies and practical characteristics that make it a popular choice for home workouts.

One of the standout features of the ProForm PFTL49392 is its powerful motor, which provides a robust performance for various workout intensities. The 2.5 CHP motor ensures smooth operation while supporting speeds up to 10 miles per hour, making it suitable for walking, jogging, and running. Coupled with a 10% incline capability, users can increase the intensity of their workouts by simulating uphill running, which effectively enhances calorie burn and overall cardiovascular fitness.

The treadmill boasts a spacious running surface, measuring 20 inches wide by 55 inches long. This generous space allows for comfortable strides, accommodating users of different heights and running styles. Additionally, the ProForm PFTL49392 features the proprietary ProShox cushioning system, designed to reduce impact on joints and provide a more comfortable running experience, which is especially beneficial for long training sessions.

Another significant aspect of the PFTL49392 is its integration with technology. The treadmill comes equipped with a 7-inch Smart HD touchscreen display that provides clear feedback on workout metrics, including time, distance, speed, calories burned, and heart rate. The console is also compatible with iFit technology, offering a subscription-based interactive training experience. Users can access a vast library of on-demand workouts led by professional trainers, as well as automated workouts that adjust speed and incline based on terrain simulation.

For added convenience, the ProForm PFTL49392 treadmill includes Bluetooth connectivity, allowing users to connect their devices, stream music, and enhance their workout experience. It also features built-in speakers and a tablet holder for multimedia entertainment while exercising.

Durability is another key characteristic, as the ProForm PFTL49392 is built with a robust frame that can withstand long-term use. The folding design facilitates easy storage and saves space in home gyms.

Overall, the ProForm PFTL49392 treadmill stands out for its blend of advanced features, user-friendly technology, and comfort-driven design, making it an excellent choice for those looking to enhance their fitness journey at home.
Top Page Image Contents