JVC CA-FSH100 Selecting the Source, Adjusting the Volume, Fade Muting, Selecting the Sound Modes

Page 11

Selecting the Source

To select the source, press CD 6, TAPE, FM/AM, or AUX.

•When you select CD as the source, playback starts automatically.

To operate the tuner (FM or AM), see pages 10 and 11. To operate the CD player, see pages 12 to 14.

To operate the tape deck, see page 15. To record on a tape, see pages 17 and 18. To use an external equipment, see page 16.

Adjusting the Volume

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOL MIN,” “VOL 01” – “VOL 30,” and “VOL MAX.”

• The volume level has no effect on recording.

VOLUME

To increase the volume, press VOLUME + (or turn VOLUME control clockwise on the unit). To decrease the volume, press VOLUME – (or

turn VOLUME control counterclockwise on the unit).

•When you press and hold either button, you can change the volume level continuously.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (standby) the unit with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

Fade Muting

On the remote control ONLY:

Press FADE MUTING.

FADE

MUTING

The volume level decreases to “VOL MIN,” and “MUTING” starts flashing on the display.

To release muting, press FADE MUTING again. The volume level resumes to the previous level.

• Adjusting the volume level also cancels the muting.

Selecting the Sound Modes

You can select one of the 4 sound modes.

•This function also affects the sound from headphones.

•This function only affects the playback sound, and does not affect your recording.

On the remote control ONLY:

To select the sound modes, press SOUND

SOUND

 

repeatedly.

 

•Each time you press the button, the sound mode changes as follows:

ROCK POP CLASSIC

OFF JAZZ

ROCK: Powerful sound emphasizing treble and bass.

POP: More presence in the vocals and midrange.

CLASSIC: Enriched sound with fine treble and ample bass.

JAZZ: Accented lower frequencies for jazz-type music.

OFF: Equalizer effect is canceled.

SOUND

When the sound mode is activated, the SOUND indicator lights up on the display.

Adjusting the Tone (Bass/Treble)

You can adjust the bass level (low frequency range) and the treble level (high frequency range) within a range of –1 to +4. When shipped, the bass level set to “BASS 0” and the treble level set to “TREBLE 0.”

•This function only affects the playback sound, and does not affect your recording.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 1.

On the remote control ONLY:

1 Press BASS/TREBLE once to adjust TREBLE

 

BASS/

the bass level or press BASS/

 

TREBLE twice to adjust the treble

 

level.

 

2 Press PRESET UP to increase the

PRESET UP

 

level or press PRESET DOWN to

 

decrease it.

 

 

PRESET DOWN

•You cannot use the tone adjustment function and the sound mode function at the same time. (The sound mode changes automatically into “OFF” when pressing BASS/TREBLE.)

•The bass/treble setting automatically returns to “0” when you select one of the sound modes (see “Selecting the Sound Modes” above).

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Compact Component System Front view Contents About This Manual PrecautionsIntroduction Front view Location of the Buttons and ControlsMain Unit Top viewMain unit Display window Display windowRemote Control Release your finger from the clamp Getting StartedUnpacking ConnectionsTo connect audio equipment Connecting Other EquipmentConnect the supplied AM loop antenna to AM Loop terminal To connect AM and FM antennasBasic and Common Operations Setting the ClockTurning On the Power Fade Muting Adjusting the VolumeAdjusting the Tone Bass/Treble Selecting the SourceListening to FM and AM Broadcasts Tuning in to a StationPresetting Stations Tuning in to a Preset Station Press 0 Open on the unit When playing CD-Rs or CD-RWsPlaying Back Discs Playing Back the Entire Disc-Normal PlayPress ¢ or 4 to select the track number, then press On the remote control only Place a discBasic Disc Operations Programming the Track Playing Order Program PlayDisplaying the Remaining Time during Playback Playing at Random-Random PlayRepeating Tracks-Repeat Play Press # play Playing Back TapesPlaying Back a Tape On the unit only Press &/ stop/cassette holder openListening to the External Equipment Using an External EquipmentSet the volume level to the minimum position Press AUX To protect your recordings RecordingRecording on a Tape Press ‡ recordingPress 7 to stop the disc playback Press ‡ recording Recording Discs Disc Synchronized RecordingUnit to turn on Using the TimersUsing the Daily Timer Press SET to set the on-time you wantTo deactivate the timer temporarily Using the Sleep TimerOn the remote control only Press Sleep How the Sleep Timer actually worksHandling cassette tapes MaintenanceCleaning the unit Handling discsSymptom Possible Cause TroubleshootingSpecifications Limited Warranty Authorized Service Centers FS-H100 Compact Component System

SP-FSH100, FS-H100, CA-FSH100 specifications

The JVC CA-FSH100, FS-H100, and SP-FSH100 combine innovation and design in a compact audio system that delivers high-quality sound and versatile functionality for music enthusiasts and casual listeners alike. This trio comprises a mini-component system, a speaker system, and a replacement speaker, showcasing JVC's commitment to audio excellence.

The CA-FSH100 serves as the heart of the audio system, featuring a CD player, AM/FM tuner, and USB playback. Its sleek design is not just aesthetically pleasing but also functional, with an easy-to-navigate control panel and a remote for added convenience. One of its standout features is the ability to connect to various audio sources, including a 3.5mm auxiliary input, allowing users to enjoy their favorite music from smartphones or tablets effortlessly. The CA-FSH100 also supports MP3 and WMA formats, expanding its versatility.

The FS-H100 speaker system is designed to complement the CA-FSH100, providing an impressive audio experience. Utilizing JVC's unique sound technology, the speakers deliver clear highs and deep bass, ensuring a rich, immersive listening experience. The compact design helps fit well in various spaces, making it suitable for both small apartments and larger rooms alike. The wood cabinet construction further enhances sound quality by minimizing vibrational distortion.

Complementing this setup is the SP-FSH100, a replacement speaker engineered to maintain the performance levels of its counterparts. This speaker is designed to be versatile, ensuring compatibility with a range of audio systems while providing excellent sound reproduction. With a focus on high-quality materials and advanced engineering, the SP-FSH100 stands out for its durability and reliability, making it an ideal choice for those looking to upgrade or replace their existing speakers without compromising on audio quality.

In addition to audio performance, the entire JVC CA-FSH100 system is engineered for energy efficiency, meeting modern standards for environmentally-conscious consumers. Together, these components create a cohesive audio solution that balances style, performance, and accessibility, perfect for music lovers of all kinds.

In summary, the JVC CA-FSH100, FS-H100, and SP-FSH100 reflect a well-rounded audio system that combines advanced technology, excellent sound quality, and user-friendly features. Whether you're hosting a party, enjoying a quiet night in, or seeking efficient sound solutions, this mini-component system from JVC offers a compelling choice for enhancing your listening experience.
Top Page Image Contents