ProForm 831.29523.4 user manual Do not overtighten the Screws

Page 9

7.Set the Console Base (47) on the Right Handrail (72) and the Left Handrail (71). Attach the Console Base with four 1/2” Screws (48). Start all four Screws before tighten- ing them; do not overtighten the Screws.

8.Press the Upright Wire (42) into the slot in the underside of the Console Base (47) in the indicated area. Cover the Upright Wire with the Right Grip Plate (36). Be careful not to pinch the Upright Wire. Tighten three 1/2” Screws (48) into the Right Grip Plate and the Console Base.

Attach the Left Grip Plate (32) over the ground wire and the other wires with three 1/2” Screws (48). Be careful not to pinch any of the Wires.

9.Attach the Storage Latch (29) and the Latch Spacer (44) to the left Upright (69) with two 3/4” Screws (2) as shown.

Do not overtighten the Screws.

7

 

 

47

 

 

 

72

 

 

71

 

48

 

 

 

 

 

48

8

 

 

47

 

Slot

 

Ground

 

 

 

 

 

 

Wire

 

 

 

42

 

 

36

32

 

 

 

 

48

 

48

 

 

 

9

 

 

 

 

69

 

 

 

 

 

44

 

29

 

2

 

 

 

10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.

9

Image 9
Contents Model No Serial No Assembly Operation Maintenance Part List and DrawingTable of Contents Important Precautions Page Before YOU Begin Right SideBack Make sure that the power cord is unplugged AssemblyPage Tek Screw, without the Base Pad, first Do not overtighten the Screws Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt STEP-BY-STEP Console Operation Console DiagramInsert the key into the console Pressbelt. the Speed + button to start the walkingPulse display -This Change the incline of the treadmill as desiredTime/Distance display-This display Measure your heart rate if desiredHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Page If a part is missing, call toll-free Key Qty DescriptionExploded DRAWING-Model No Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full 90 DAY Warranty