Assembly, Driver and rubber mallet | ProForm 831.299474 instruction

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own Phillips screw-

driver and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the treadmill to the upright position.

While a second person tips the treadmill to one side slightly and holds it, insert one of the Extension Legs (103) into the treadmill as shown. Make sure that the Extension Leg is turned so the Thick Base Pad (97) is on the bottom.

Next, tip the treadmill to the other side and insert the other Extension Leg (not shown) in the same way. Lower the side of the treadmill so that both Extension Legs

(103)are resting flat on the floor.

2.With the help of a second person, carefully lower the treadmill frame and then tip the Uprights (82) down as shown. Note: It maybe helpful to place a foot on the wheel as you tip the Uprights. Make sure that the

Extension Legs (103) remain in the Uprights.

Attach each Extension Leg (103) with two Screws (101) and a Base Pad (119) as shown.

Note: One replacement Base Pad (119) and Spacer (not shown) may be included. If a Base Pad becomes worn and needs to be replaced, use the replacement Base Pad. If a Thick Base Pad (97) needs to be replaced, use the replacement Base Pad with the Spacer.

3.With the help of a second person, carefully tip the Uprights (82) back to the vertical position.

Attach the Latch Assembly (9) and the Latch Spacer (56) to the left Upright (82) with two Screws (101) as shown.

	1
		82
	103
	97
	2	97
		97
		119
		101
		103
		97
	82	119
	82	101
		101
		101
		103
		97
	3
		56
		9
		82
	101	101
		101

	1
		82
	103
	97
	2	97
		97
		119
		101
		103
		97
	82	119
	82	101
		101
		101
		103
		97
	3
		56
		9
		82
	101	101
		101

	1
		82
	103
	97
	2	97
		97
		119
		101
		103
		97
	82	119
	82	101
		101
		101
		103
		97
	3
		56
		9
		82
	101	101
		101

	1
		82
	103
	97
	2	97
		97
		119
		101
		103
		97
	82	119
	82	101
		101
		101
		103
		97
	3
		56
		9
		82
	101	101
		101