ASSEMBLY
Assembly requires two people. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled. No tools are required.
Note: The underside of the treadmill walking belt is coated with
1.With the help of a second person, carefully raise the Uprights (65) until the Wheels (77) are resting on the floor as shown.
1
65
77
2.Remove the Lock Knob (67) from the Lock Pin (72). Make sure that the Lock Pin Collar (70) and the Spring (69) are on the Lock Pin. (Note: If there are two Lock Pin Collars, there should be one on each side of the Spring.) Insert the Lock Pin through the Left Foam Grip (62), and tighten the Lock Knob onto it.
After assembly is completed, pull the Left Foam Grip (62) in the direction shown until the Latch Pin (72) slides freely.
2 |
67 |
62 |
70 |
72 |
69 |
3.Make sure that all parts are tightened before you use the treadmill. Place a mat beneath the treadmill to protect the floor or carpet. For your benefit, we recommend that you familiarize yourself with the TROUBLESHOOTING AND MAINTENANCE section on pages 23 and 24.
6