ProForm 831.297770 user manual Harness into the right Upright

Page 6

4.While a second person holds the Right Handrail (85) and the Console Base (87) near the right Upright (82), cut the indicated plastic ties off the Right Handrail. Do not cut the other plastic tie off the Right Handrail. Next, cut the plastic tie off the Upright Wire Harness (34) in the right Upright (82). Do not drop the Upright Wire

Harness into the right Upright.

Refer to the inset drawing. Connect the Upright Wire Harness (34) to the Console Wire Harness (48). The latch on the Console Wire Harness should snap onto the Upright Wire Harness. If the Wire Harnesses do not fit together easily, turn them; do not force the Wire Harnesses together. Next, connect the right pulse wire (with the ÒRÓ tag), the left pulse wire, and the ground wire to the corresponding connectors on the Console Wire Harness (48); make sure that the wires with tags are connected to each other.

5.Note that there is still a plastic tie in the Right Handrail (85); do not remove this plastic tie.

Position the Right Handrail (85) on the right Upright (82) as shown. The bracket on the base of the right Upright should be inside of the lower end of the right Handrail, as shown in the inset drawing.

While holding the Console Base (87) near the Right Handrail (85), feed the Console Wire Harness (48) into the Right Handrail. Next, place the Console Base on the Handrails (74, 85). Insert any remaining Console Wire Harness into the Right Handrail.

Thread two Handrail Bolts (78) with Handrail Washers

(36)into the Left Handrail (74) and the left Upright (82) as shown. Do not tighten the Handrail Bolts yet. Next, thread two Handrail Bolts (78) with Handrail Washers

(36)into the Right Handrail (85) and the right Upright

(82).Do not tighten the Handrail Bolts yet. Be careful to avoid damaging the Console Wire Harness (48).

6.Attach the Console Base (87) to the Left and Right Handrails (74, 85) with four Long Screws (114).

Refer to assembly step 5. Tighten the four Handrail Bolts (78) used in assembly step 5.

Press two Small Upright Plugs (79) into the holes near the upper ends of the Uprights (82).

7.Remove the backing from the Adhesive Clip (99). Press the Adhesive Clip onto the base of the right Upright (82) as shown. Press the Allen Wrench (100) into the Adhesive Clip.

8.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill.

6

4

87

 

 

48

 

 

 

 

 

 

 

34

 

Do not

 

 

 

 

cut

 

 

 

 

Right

Left

Ground

Cut

 

 

 

 

Plastic

 

 

85

 

Ties

 

 

 

48

34

 

Cut Plastic Tie

 

 

 

 

 

 

 

82

 

 

 

5

 

87

 

Do not

 

 

 

 

Remove

 

 

 

 

this

 

48

 

 

Plastic

 

 

 

 

Tie

78

78

 

 

36

 

 

 

36

 

82

 

82

85

74

 

 

 

 

 

 

85

36

78

 

Bracket

 

 

 

 

6

87

 

 

 

 

 

 

 

114

 

 

 

 

 

79

 

 

 

74

 

 

85

114

 

 

 

 

 

82

 

 

 

7

 

 

 

 

 

 

 

82

 

99

 

100

 

 

 

 

Image 6
Contents Model No Serial No SEARS, Roebuck and CO., Hoffman ESTATES, ILTable of Contents Important PrecautionsPage Before YOU Begin Left Side Right SideAssembly Harness into the right Upright Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt STEP-BY-STEP Console Operation Console DiagramOn the face of the console, remove it Key Insert the key fully into the consoleDISTANCE/LAPS CALS/FAT CalsWhen you are finished, remove the key Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEProblem the Power Turns OFF During USE TROUBLE-SHOOTINGProblem the Power does not Turn on TopProblem The walking belt slows when walked on Problem The walking belt is off-center when walked onProblem The walking belt slips when walked on Conditioning Guidelines Exercise IntensityWorkout Guidelines Part LISTÑModel No Key No. Qty DescriptionExploded DRAWINGÑModel No 103 104 114 108 101 118 120 119 102 107 105 100 Full 90 DAY Warranty Model NoSEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL