4. Hold the Left Upright (90) against the Base | 4 |
|
|
(105). Be careful not to pinch the wires. If |
|
|
|
necessary, position the Base Ground Wire |
|
|
|
(100) in the hole in the side of the Left Upright. |
|
|
|
Insert two 3/8" x 2 3/4" Screws (8) and two 3/8" |
|
|
|
x 1 1/4" Screws (9) with two 3/8" Star Washers |
|
|
|
(14) into the Left Upright. |
|
|
|
Partially tighten the 3/8" x 2 3/4" Screws (8) and |
|
|
|
the 3/8" x 1 1/4" Screws (9) until the heads of |
| 90 |
|
the Screws touch the Left Upright (90); do not |
|
| |
|
|
| |
fully tighten the Screws yet. Note: It may be |
|
|
|
helpful to use the Short Hex Key (43) on the |
|
|
|
Screw shown. |
| 8 |
|
|
|
| |
Attach the Right Upright (not shown) in the |
|
| 43 |
same way. Note: There are no wires on the | Hole |
|
|
right side. | 14 |
|
|
|
|
| |
| 100 |
|
|
| 9 | 14 | 105 |
|
|
| |
5. Identify the Left and Right Base Covers (96, 97). | 5 |
|
|
Slide the Left Base Cover (96) onto the Left |
|
|
|
Upright (90). Slide the Right Base Cover (97) |
|
|
|
onto the Right Upright (99). Do not press the |
|
|
|
Base Covers into place yet. |
|
| 99 |
|
| 90 | 97 |
| 96 |
|
|
| 9 |
|
|