![](/images/new-backgrounds/1271338/2713389x1.webp)
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the following tools: The included allen wrench and your own
phillips screwdriver ![](/images/new-backgrounds/1271338/2713389xi2.webp)
and adjustable wrench
.
Note: The underside of the treadmill walking belt is coated with
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Latch/Handrail Screw | Handrail Bolt | Handrail Washer | Extension Leg Screw | |||
|
|
| ||||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.
1
11
2.Insert one of the Extension Legs (34) into the treadmill as shown. (Note: It may be helpful to tip the Uprights [11] in the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (53). Be sure to push on the head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (34) in the same way.
2
11
53
34
40
5