ProForm PFTL313340 user manual See . Firmly tighten the 1 Bolts 63

8. Attach the Weight Rack (107) to the Uprights (73, 108) as
	8
shown with four 3/4” Screws (2).

	2	107
		2
	73	108
9. See step 3. Firmly tighten the 1” Bolts (63) and the 2”	9
Bolts (114).
Lower the Handrails (not shown) to the floor. Make sure		69
that the Frame (86) is centered between the
Handrails. Firmly tighten the 3” Bolts (61).
Raise the Handrails to the vertical position. Set the hand		61
weights (not shown) on the Weight Rack, with the lightest
weights in the center.
	86	61

10.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.

9