ProForm DTL73941 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 22

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the treadmill, make sure to lift with your legs rather than your back. Raise the treadmill about halfway to the vertical position.

2.Hold the treadmill frame firmly with your left hand. Using your right hand, pull the latch knob to the right and hold it. Raise the treadmill until the pin on the latch knob is aligned with the hole in the left handgrip. Then, release the latch knob. Make sure that the latch knob is fully released so the pin is fully inserted into the hole in the left handgrip.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the pin on the latch knob is fully inserted into the hole in the left handgrip.

1.Hold the handgrips and place one foot on the base.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot on the wheel, and carefully lower the treadmill until the base is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1

2

 

Frame

Latch

 

Latch

Knob

Pin

Knob

 

Handgrip

 

Pin

Handgrip

 

 

Base

 

Wheels

1.See drawing 2 above. Hold the treadmill frame firmly with your left hand. Pull the latch knob to the right. Pivot the treadmill down until the pin on the latch knob is below the handgrip. Slowly release the latch knob.

2.See drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To de- crease the possibility of injury, bend your legs and keep your back straight.

22

Image 22
Contents Model No. DTL73941 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Page For your benefit, read this manual carefully before Before YOU BeginRight Side Back Assembly As shown. Do not tighten the Screws yet Treadmill Operation HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeSpeed display-This Distance/Incline disCalories/Pulse Pace/Time displayHOW to USE Personal Trainer Programs Select one of the personal trainer programsFollow your progress with the displays Enter your age HOW to USE Heart Rate ProgramsSelect a heart rate program Enter a maximum speedFollow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerAudio Adapter Cable Insert the key into the console HOW to Connect Your VCRPressVCR. the Play button on your CD player or Measure your heart rate if desired Return to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Follow your progress with the LED track DisplaysInformation MODE/DEMO Mode Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR1003A Qty DescriptionDescription Exploded DRAWING-Model Exploded Drawing Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT