ProForm DTL42950 user manual Follow your progress with the displays

Page 15
Current Period

Press the Start button or the Speed + button to

3 start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed set- ting for the program. Hold the handrails and begin walking.

Each program is divided into several time periods of different lengths. One

speed setting is pro- grammed for each pe-

riod. (The same speed setting may be pro- grammed for two or more consecutive peri- ods.) The speed setting

for the first period will be shown in the flashing Current Period column of the LED display. The speed settings for the next three periods will be shown in the three columns to the right.

When only a few seconds remain in the first pe- riod of the program, the Speed display will flash, the Current Period column and the column to the right will flash, and a series of tones will sound.

When the first period is completed, all speed set- tings will move one column to the left. The speed setting for the second period will then be shown in the flashing Current Period column and the tread- mill will automatically adjust to the speed setting for the second period. (When the same speed set- ting is programmed for consecutive periods, the Speed display will not flash and the column to the right of the Current Period column will not flash during the last three seconds of the current pe- riod.)

Note: If all of the indicators in the Current Period column are lit after the speed settings have moved to the left, the speed settings will move downward so that only the highest indicators in the columns appear in the LED display. If some indicators in the Current Period column are not lit after the speed settings have moved to the left again, the speed settings will move back up.

To change the incline of the treadmill during the program, press the Incline buttons until the de- sired incline level is reached.

The program will continue until the speed setting for the last period is shown in the Current Period column and no time remains in the Time display. The walking belt will then slow to a stop.

Note: If the speed setting for the current period is too high or too low, you can manually override the setting by pressing the Speed buttons. Every few times a button is pressed, an additional indicator will light or darken in the Current Period column. (If any of the columns to the right of the Current Period column have the same number of lit indica- tors as the Current Period column, an additional indicator may light or darken in those columns as well.) Important: When the current period of the program ends, the treadmill will automatically adjust to the speed setting for the next period.

To stop the program temporarily, press the Stop button. The Time display will begin to flash. To restart the program, press the Start button or the Speed + button. To end the program, press the Stop button, remove the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 13.

5 Measure your heart rate, if desired.

See step 6 on page 14.

6 Turn on the fan if desired.

See step 7 on page 14.

When the program is completed, remove the

7 key from the console.

When the program has ended, adjust the incline of the treadmill to the lowest setting. Next, re- move the key from the console and put it in a safe place.

15

Image 15
Contents QUESTIONS? Model No. DTL42950 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Right SideBack Make sure that the power cord is unplugged AssemblyPad, first Repeat this step with the Left Handrail Console Base, but do not tighten it yetDo not overtighten the Screws Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerHOW to USE a Speed Program Follow your progress with the displays When the program is completed, remove Key from the consoleHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your Computer Adapter Audio Cable HOW to Connect Your VCRWhenkey. the program is completed, remove PressVCR. the Play button on your CD player orFollow your progress with the LED track Displays HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Return to the treadmill and stand on the footHOW to USE the SKI Poles Information Mode SKI Pole TroubleshootingHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Remove this Exploded Drawing and Part List from the Manual Key Qty Description Part LIST-Model No. DTL42950Model No. DTL42950 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT