2.Identify the Right Handrail (72), which has a large hole in the left side. Feed the Upright Wire (42) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli- ers to pull the Wire Harness out of the hole.
Attach the upper end of the Right Handrail (72) with a Handrail Bolt (37). Do not tighten the Bolt yet.
Attach the upper end of the Left Handrail (71) as de- scribed above. Do not tighten the Bolt yet. Note: There is not a wire harness on the left side.
3.With the help of another person, carefully lower the Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs (63) as you tip the Uprights. Make sure that the Extension Legs remain in the Uprights.
Align the lower end of the Right Handrail (72) with the hole in the Extension Leg (63). Attach the Right Handrail with a Handrail Bolt (37). Attach the lower end of the Left Handrail (71) in the same manner.
2 |
|
71 |
|
37 |
|
42 | Hole |
| |
37 | Hole |
| |
72 |
|
| 69 |
3 |
|
63
69
72
71
37
63
37
7