SETTINGS
The unit comes with the battery installed.. When you use the unit for the first time, follow the steps below. For setting range details refer to “SPECIFICATIONS”..
NOTE:
If the initial settings are not correct, the measurement results may not be accurate..
1.Press and hold 
, 
or 
.
After the following display, “lb” and “kg” flash on the display.
2.Setting the weight units.
A)Press 
or 
to select the mode..
B)Press 
to confirm the setting.
3.To set the height/stride length unit, repeat steps
A)and B) in step 2 above.
4.To set the distance unit, repeat steps A) and B) in step 2 above.
5.To set the time display, repeat steps A) and B) in step 2 above.
6.Setting the weight.
A)Press 
or 
to select the desired value for a setting..
•Press 
(
) to advance (go back) one..
•Hold 
(
) down to advance (go back) rapidly..
B)Press 
to confirm the setting.
7.To set the height, repeat steps A) and B) in step 6 above.
A)
B)
A)
B)
9