SETTINGS
The unit comes with the battery installed. When you use the unit for the first time, follow the steps below. For setting range details refer to “SPECIFICATIONS”.
NOTE: If the initial settings are not correct, the measurement results may not be accurate.
1.Press and hold 
, 
or 
.
After the following display, “inch” and “cm” flash on the display.
2.Setting the stride length unit.
A) Press | or | to select the mode. | A) |
|
B) Press 
to confirm the setting.
B)
3.To set the distance unit, repeat steps A) and B) in step 2 above.
4.To set the time display, repeat steps A) and B) in step 2 above.
9