ProForm PFEL39014 user manual HOW to USE the Elliptical Crosstrainer, HOW to Adjust the Pedals

Page 9

HOW TO USE THE ELLIPTICAL CROSSTRAINER

HOW TO ADJUST THE PEDALS

The motion of the

 

pedals is deter-

 

mined by their

 

position on the

 

flex bars. Their

 

are five different

 

pedal positions.

Pedal

To dismount the elliptical crosstrainer, wait until the pedals come to a complete stop. Note: The elliptical crosstrainer does not have a free wheel; the ped- als will continue to move until the flywheel stops.

When the pedals are stationary, step off the highest pedal first. Then, step off the lowest pedal.

HOW TO USE THE HANDLEBARS

To adjust the

Knob

pedals, first

Flex

loosen the knob

Bar

beneath each

 

pedal. Slide the

 

pedals forward or backward to the desired position, and then retighten the knobs. Make sure that both pedals are in the same position.

HOW TO EXERCISE ON THE ELLIPTICAL CROSSTRAINER

To mount the elliptical crosstrainer, hold the handgrip pulse sensor and step onto the pedal that is in the low- est position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion. Note: The pedal disks can turn in either direction. It is recommended that you move the

The handlebars are designed to add upper-body exer- cise to your work- outs. Push and pull the handlebars as you exercise to work your arms, shoulders, and back.

To exercise only your lower body, hold the handgrip pulse sensor as you exercise.

Handlebars

Handgrip

Pulse

Sensor

pedal disks in the direction shown by the arrow below; however, for variety, you may turn the pedal disks in the opposite direction.

Handgrip

Pulse Sensor

Pedals

Pedal Disk

CAUTION: Before using the ellipti- cal crosstrainer, read the following precau- tions.

Always hold the handgrip pulse sensor or the handlebars when mounting, dismounting, or using the elliptical crosstrainer.

When you stop exercising, allow the pedals to slowly come to a stop.

The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determin- ing heart rate trends in general.

9

Image 9
Contents QUESTIONS? Model No. PFEL39014 Serial NoCustomer HOT Line Table of Contents Important Precautions Front Before YOU BeginBack Left SideAssembly This step Make sure Wire Harnesses 86, 87 do not Get pinchedPage Installing the Receiver for the Optional Chest Pulse Sensor HOW to Adjust the Pedals HOW to USE the Elliptical CrosstrainerHOW to USE the Handlebars HOW to Exercise on the Elliptical CrosstrainerFeatures of the Console Console Description Select the manual mode HOW to USE the Manual ModeTurn on the console Follow your progress with the feedback modes Left bar graphSelect one of the four Smart programs HOW to USE a Smart ProgramStart the program Follow your progress with the feedback modesSelect one of the two Heart Rate programs HOW to USE a Heart Rate ProgramEnter your age Hold the handgrip pulse sensorAudio Adapter Cable Headphones HOW to Connect Your Portable Stereo HOW to Connect Your Home StereoAudio Cable HOW to Connect Your VCR HOW to Connect Your ComputerPressVCR. the play button on your CD player or HOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the elliptical crosstrainer and begin Exercising Maintenance and Troubleshooting Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description Part LIST-Model No. PFEL39014R1102A HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT