A SS E M B LY
I N S T R U C T I O N S
Step 2f
F R A M E A S S E M B L Y
In this step start by sliding one (30) on both handles on (6). Then, slide on one (31) on each side. Place (29) on the end of the handle. Once all three pieces (per side) are in place, secure (29), slide (31) flush with (29) and secure. Insert all (28) as shown. Allen Wrench tighten screws.
Part Descriptions | Hardware Descriptions | ||
6 | - Arm Rest Assy. | L - | |
28 | - 2” x 3” End Cap (VH) |
| |
29 | - 1 | 1/4” Dia. X 3/4” Aluminum Cap |
|
30 | - 1 | 1/4” Dia. X 3/4” Aluminum Ring |
|
Page 15
HOIST
FITNESS SYSTEMS
R
2412 Assembly