JVC TH-G40 manual Viewing a Jpeg file, Slide Show, Still Picture, Moving to another File

Viewing a JPEG file

This unit can play discs with JPEG files.

Before playing JPEG recordings, read the notes on JPEG Recordings on the right.

1.Insert a disc and close the tray.

The PHOTO menu appears on the TV screen.

2.Press v / V to select a folder, and then press ENTER. A list of files in the folder appears.

If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the

remote to highlight and press ENTER.

3.If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While viewing a file, you can press STOP to move to the previous menu (JPEG menu).

Tips:

There are four Slide Speed options :

> (Slow), >> (Normal), >>> (Fast) and II (off).

Use v /V /b /B to highlight the Speed. Then, use b / B to select the option you want to use and then press

ENTER.

If you set Speed option to Off, the slide is not active.

Slide Show

1.Highlight the file (not folder) which you like beginning to slide show.

2.Select the slide speed. (Refer to the tips this page)

3.Use v V b B to highlight the (Slide Show) then press ENTER.

Note:

•The sequence of slide show is from top to down, cannot be reverse.

•Slide show cannot repeat automatically, you could start the slide show again manually.

Still Picture

1.Press PAUSE/STEP during the slide show.

The DVD/CD Receiver will now go into the PAUSE mode.

2.To return to the slide show, press PLAY or press PAUSE/STEP again.

Moving to another File

Press SKIP (. or >) once during viewing a picture to advance to the next or previous file.

Rotating the picture

Press v V b B during showing a picture to rotate the picture clockwise or counter-clockwise.

JPEG disc compatibility with this player is limited as follows:

•Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc.

•The total number of files and folders on the disc should be less than 999.

•Some discs may not operate due to a different recording format or the condition of disc.

•Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout.

•If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” file.

•File names without “.jpg” extension will not be able to be read by this DVD/CD Receiver. Even though the files are shown as JPEG image files in Windows Explorer.

Operation

18