TIME/CALENDAR Setting

English

NOTES ON USING THE WATCH

[CALENDAR SETTING]

●The calendar automatically adjusts for odd and even months except February of leap years.

●The flashing digits move quickly if button C is kept pressed.

●If the watch is left untouched in the CALENDAR SETTING display with the digits flashing, it will automatically return to the CALENDAR mode in 1 to 2 minutes.

[DIGITAL TIME SETTING]

●The flashing digits except the seconds and the 12-/24-hour indication move quickly if button C is kept pressed.

●In setting the seconds, when the seconds read any number from “30” to “59” and button C is pressed, one minute is added and the seconds are reset to “00”.

●Changeover between 12- and 24-hour indications is made alternately with each press of button C.

●When setting the hour digits in the 12-hour indication, check that AM/PM is properly set. Only “PM” mark is displayed. For the AM setting, there is no indication.

●If the watch is left untouched in the TIME SETTING display with the digits flashing, it will automatically return to the TIME mode in 1 to 2 minutes.

[ANALOGUE TIME SETTING]

●When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.

●When the crown is pulled out or pushed in for time setting, the minute hand may move slightly. However, this is not a malfunction.