Seiko CAL. 7T94 manual Stopwatch Hand Position Adjustment

Page 6

English

1.When the stopwatch is or has been measuring, if the crown is pulled out to the second click, it will automatically reset the STOPWATCH hands to “0”.

2.It is recommended that the hands be set to the time a few minutes ahead of the current time, taking into consideration the time required to adjust the STOPWATCH hand position if necessary.

3.When setting the hour hand, be sure to check that AM/PM is correctly set. The watch is so designed that the date changes once in 24 hours.

4.When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute.

2. STOPWATCH HAND POSITION ADJUSTMENT

STOPWATCH

1/5-second handSTOPWATCH minute hand

A

6

B

6

If the STOPWATCH hands are not in the “0” position, follow the procedure below to set them to the “0” position.

APress for 2 seconds.

*STOPWATCH minute hand turns a full circle.

BPress repeatedly to set STOPWATCH minute hand to the “0” position.

*The hand moves quickly if button B is kept pressed.

Image 6
Contents Cal T94 105 頁Page Contents CAL T94 Setting the Time Adjusting the Stopwatch Hand Position Main Time SettingStopwatch Hand Position Adjustment Stopwatch 1/5-second hand turns a full Circle Setting the Date Stopwatch Measurement of two competitors Security Lock of PUSH-BUTTON a & B Tachymeter To measure the hourly average speed of a vehicleTo measure the hourly rate of operation Battery Change YearsEnglish Specifications Telemeter HOW to USE the Telemeter