ENGLISH
WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated.
Water-Resistance Depth | p.s.i.a. * Water Pressure |
| Below Surface |
| |
50m/164ft | 86 |
| |
100m/328ft | 160 |
| |
200m/656ft | 284 |
| |
*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE ON ANY WATCH, THE CROWN SHOULD NOT BE PULLED OUT WHEN THE WATCH IS SUBMERGED IN WATER. ADDITIONALLY, PUSHERS ON WATCH- ES WITH A WATER-RESISTANCE DEPTH RATING OF LESS THAN 200 METERS, SHOULD NOT BE PUSHED WHEN SUBMERGED IN WATER. EITHER OF THESE ACTIONS COULD RESULT IN WATER ENTERING THE WATCH CASE.
ENGLISH
1.Watch is water-resistant only as long as crystal, crown and case remain intact.
2.Watch is not a diver watch and should not be used for diving.
3.Screw-in setting crown and case back must be screwed into case to assure water-resistance (see Set Time for Style 1).
4.Rinse watch with fresh water after exposure to salt water.
5.Shock-resistance will be indicated on the watch face or caseback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging the crystal.
