![](/images/new-backgrounds/1134627/13462713x1.webp)
To Set or Adjust Time Zone 1:
A. Press SET. Hold to Set appears.
B. Continue holding until Set Time appears. Hours will begin flashing. Press START to advance the flashing digits.
C. Press MODE to set (in order): MINUTES; DAY OF THE WEEK; MONTH; DATE; 12- OR
D. Press SET to save changes and exit Set Time.
To Change Time Zone Display:
A. Press START to view Time Zone 2 display. Release the button if you only want to peek at Time Zone 2.
B. Press and hold START for 6 seconds and Time Zone 2 becomes primary display.
C. Follow steps A through D above to set Time Zone 2. NOTE: Seconds cannot be manually changed.
To View Time of Day and Speed and Distance:
With the Transceiver functioning and while six feet from other people, press SPEED/DISTANCE DISPLAY button to begin displaying data. Press it repeatedly to select the data to view.
Chrono Mode (Chronograph or Stopwatch)
The Chronograph (Chrono) will time events up to 100 hours. It will store to memory the lap number, lap time, split time, average speed, average pace and distance for each lap taken.
A lap time is the time for a segment of an event. A split time is the total time from the beginning of an event.
Data displayed in CHRONO mode for Average Speed, Maximum Speed, Average Pace, Best Pace and Distance are based only on information received since the chrono was started.
You can go to other modes while the Chronograph is running. In the Time display, a stopwatch symbol will appear on the display to indicate the Chrono is running.
A. Press START to begin timing. B. Press STOP to stop timing.
C. Press START to resume timing OR
D. With Chrono stopped, press and hold RESET to reset display to zero.
10 | 11 |