JVC GVT0134-001B Listening to FM and AM Broadcasts, Tuning in to a Station, Presetting Stations

Page 16

Listening to FM and AM Broadcasts

Tuning in to a Station

1 Press FM/AM to select either “FM” FM/AM or “AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

Each time you press the button, the band alternates between FM and AM.

Presetting Stations

You can preset 30 FM and 15 AM stations manually.

In some cases, test frequencies have been already stored for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

2 Press and hold ¢ or 4 (or ¢ UP or 4 DOWN on the unit) for more than 1 second.

¢ (¢ UP): Increases the frequencies.

4 (4 DOWN): Decreases the frequencies.

The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in.

If an FM program is broadcast in stereo, the STEREO indicator lights up on the display (only when the reception is good).

To stop during searching, press ¢ or 4 (or ¢ UP or

4DOWN on the unit).

On the remote control ONLY:

1 Tune in to the station you want to preset.

• See “Tuning in to a Station.”

2 Press SET.

SET

 

“SET” starts flashing on the display.

3

UP

Press UP or DOWN to select a

 

preset number.

 

DOWN

When you repeatedly press ¢ or 4 (or ¢ UP or 4 DOWN on the unit)

The frequency changes step by step.

To change the FM reception mode

On the remote control ONLY:

When an FM stereo broadcast is hard to receive

FM

or noisy, press FM MODE so that the MONO

MODE

 

indicator lights up on the display. Reception will

 

improve.

 

To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast.

You can also select the preset number using the number buttons.

Ex.: For preset number 5, press 5. For preset number 15, press +10,

then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

10+10

13

Image 16
Contents Instructions Mises en garde, précautions et indications diverses Page Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront panel Display window on the front panel Display windowSee pages in parentheses for details Remote ControlDisc number buttons 16 CD 1, CD 2, CD 3, CD 4, and CD Connecting Antennas Before connecting it, disconnect the supplied FM antennaGetting Started UnpackingConnecting Speakers Release your finger from the clampAM antenna To connect an outdoor AM antennaConnecting Other Equipment Putting the Batteries into the Remote ControlTo remove the speaker grilles To connect audio equipmentSetting the Clock On the remote control onlyOn the remote control only Press CLOCK/TIMER Basic and Common OperationsTurning On the Power To turn off the unit automatically Auto StandbyAdjusting the Volume On the remote controlReinforcing the Bass Sound On the unitAdjusting the Tone Changing the Display BrightnessPresetting Stations Tuning in to a StationListening to FM and AM Broadcasts Press UP or Down to select a UP preset number Tuning in to a Preset StationPress SET again When playing CD-Rs or CD-RWs About the disc indicatorsPlaying Back Discs on the 5-CD Changer Loading DiscsPlaying Back All the Entire Discs -Continuous Play On the unit onlyTo go to another track directly using the number buttons Basic Disc OperationsTo select a group or track before playback MP3 discs only To locate a particular point in a track during playOn the remote control only Load discs into the 5-CD Changer Press Play Mode repeatedly untilPrograming the Track Playing Order -Program Play CD Program appears on DisplayPlaying at Random-Random Play Repeating Tracks or Discs-Repeat PlayProhibiting Disc Ejection CD Random appears on DisplayUsing the Timers Using the Daily TimerSet the on-time you want the unit to Turn on Set the off-time you want the unit to turn offPress UP or Down to set the volume level, then press Adjust the clock if neededSee Setting the Clock on Press STANDBY/ON to turn off Unit if the unit is onUsing the Sleep Timer On the remote control only Press SleepHow the Sleep Timer actually works Sleep indicator lights up on the displayMaintenance TroubleshootingSpecifications Amplifier Section-CA-FSS57 GeneralTuner CD player Speaker Section-SP-UXS57Limited Warranty Authorized Service Centers FS-S57 Compact Component System Manuel D’INSTRUCTIONS Mises en garde, précautions et indications diverses Page English Contents Location of the Buttons and Controls Display window on the front panel Remote Control Getting Started Getting Started Connecting Other Equipment Basic and Common Operations Turning On the Power Mode changes as follows Adjusting the Tone Listening to FM and AM Broadcasts Stored appears on the display for a ButtonsWhile Playing Back Discs on the 5-CD Changer To select the disc you want On the unit Press Disc Select repeatedlyPress #/ 8 CD To go to another track directly using the number Disc number Play Mode Using the Timers CLOCK/TIMER Using the Sleep Timer Clean To get the best performance of the unit, keep your discs400 mV/48 kΩ Amplifier Section-CA-FSS57Speakers/Impedance 16 Ω EN, FR 0204AIMMDWJEM Victor Company of JAPAN, Limited

CA-FSS57, GVT0134-001B specifications

The JVC CA-FSS57, also known by its model number GVT0134-001B, stands out as a versatile and stylish audio system that caters to a wide range of music enthusiasts. Combining vintage design with modern features, this micro stereo system is engineered to deliver powerful sound while providing connectivity options that meet contemporary needs.

One of the main features of the CA-FSS57 is its impressive audio output. The system utilizes a robust amplifier that ensures clear and dynamic sound across various music genres. Integrated speakers have been meticulously crafted to produce rich bass tones and crisp treble, allowing listeners to experience their favorite tracks in high fidelity. The compact design does not compromise audio performance, making it suitable for both small and large spaces.

The system also offers various playback options, accommodating different media preferences. It includes a CD player capable of reading multiple formats, ensuring that users can enjoy their music collections with ease. Additionally, the built-in FM/AM tuner allows for seamless radio listening, with presets available for favorite stations. For those preferring digital playback, the CA-FSS57 is equipped with auxiliary inputs, enabling connections to smartphones and other digital devices.

Moreover, the JVC CA-FSS57 boasts Bluetooth connectivity, a much sought-after feature in modern audio systems. This allows users to stream music wirelessly from their mobile devices, offering flexibility and convenience in how they consume audio. The inclusion of USB ports for playback further enhances the user experience, allowing for direct connection of flash drives filled with music files.

The CA-FSS57's user-friendly interface features intuitive controls for easy operation. The system is designed to be user-centric, minimizing the learning curve for new users while providing functionality for more advanced operations. A remote control is often included, allowing users to adjust settings from a distance, perfect for home entertainment scenarios.

In summary, the JVC CA-FSS57 GVT0134-001B is a comprehensive audio system that successfully blends high-quality sound with modern technology. Its rich feature set, including versatile playback options, Bluetooth connectivity, and robust audio performance, makes it a compelling choice for anyone looking to enhance their listening experience. The combination of functionality and stylish design ensures it fits seamlessly into any home décor, making it not only an audio investment but a stylish addition to living spaces.