Skullcandy MacGyver manual Battery power indicator, Time setting

Page 15

duct is already connected to PC and being recharged. 3.Flashing USB lightUSBmeans data in transmissionBusy); lighted USB lightUSBmeans ready for workIdle) ;dead USB lightUSBmeans disconnected with PCSuspend

4.Remove the product as per PC's requirement when upload and download completed.

Battery power indicator

Power indicator (POWER light): lights up --- full power Flashing per second --- 1/5 power remained Flashing per 0.5 second --- out of power soon

Off --- out of power and automatic power off

Time setting

1.Pull out the crown to stop the second

Crown

hand when it sweeps to 12 o'clock. 2.Turn the crown to set hour and minute hands.

3.Push back the crown and the second

hand starts sweeping.

Battery recharging

Recharging is needed when power indicator (POWER light) is flashing per 0.5 second or off. 1Connect the watch to PC through USB cable or through optional adaptor to AC power for recharging (ref. to Figure Battery recharging')

12

'

Image 15
Contents Page Table of Content III Basic Functions Ⅰ General DescriptionsPage VOLUME+ Accessories Button function overview Ⅱ OperationFunction light overview Mode switch Power on/offRecording Playing MP3 music under MP3 mode Classicjazz Equalizer modes under music playing modeShortcut keys to recording funtionunder Volume & music/voice recording controlPC connection Deleting music/voice recordingTime setting Battery power indicatorBattery recharging USB connection III Installation of MP3 Player System requirementsInstallation guide Click Yes button to continue Select the installation folder Then click Next Click Next to start installation Installation completed Page Firmware download Click Close to complete the download Ⅳ Cautions Preparation Ⅴ Changing the USB CableLift of the defect USB plug Unscrew the casePlace the new USB plug Fixing the case Ⅵ Helpful Tips Ⅶ Product Specifications