Seiko 7T84 brochure Keep pressing button a for 2 seconds

English

Example: When the restart setting function is activated during the stopwatch measurement after the 5-minute yacht timer finishes counting down , and 4 minutes has elapsed since then.

Keep pressing button A for 2 seconds

u For actual yacht racing, the restart setting function can be used in 5	English
minute yacht timer measurements as follows:
<Example of use of the restart setting function in racing where the time
from the warning signal to start signal is defined as 5 minutes, and the time
from the start signal to restart signal is defined as 10 minutes>

Yacht timer starts.

(Timer restarts.)

Race proceedings Warning signal Start signal General recall signal Restart signal

(button A)	Stopwatch starts.		Stopwatch restarts.
5”00 interval		5”00 interval	5”00 interval	5”00 interval

<5 minutes prior to start> <4 minutes after start>

Keep pressing button A for 2 seconds

Yacht timer operation

Timer	Stopwatch Timer		Stopwatch
5”00 elapsed	4”00 elapsed	Timer starts from 1”00 to go.
Elapsed time

Yacht timer starts.

(button A) Stopwatch starts.

5”00 interval 5”00 interval

(Timer restarts.)

Stopwatch restarts.

5”00

interval

Yacht timer operation

Timer Stopwatch Timer Stopwatch

*For the 5-minute yacht timer, restarts of the stopwatch occur at 5-minute intervals from the start of measurement.

*For the 6-minute or 10-minute yacht timer, restarts of the stopwatch occur at 6-minute or 10-minute intervals respectively from the start of measurement.

5”00 elapsed	7”30 elapsed	Timer starts
Elapsed time		from 2”30 to go.

*The general recall signal is a signal issued when a number of yachts make false starts or violate racing rules and the race committee is unable to identify or the starting procedures are incorrect.

*For detailed rules on yacht racing, check the appropriate racing rules of each race.

20 21