English
●While the stopwatch is measuring, pressing button A will not reset the stopwatch.
●Do not press buttons A and B at the same time, nor press one of the two buttons while keeping the other pressed. Otherwise, a malfunction will result.
SPECIFICATIONS
1 | Frequency of crystal oscillator | 32,768 Hz (Hz = Hertz … Cycles per second) |
2 | Loss/gain (monthly rate) | Less than 15 seconds at normal temperature range |
|
| (5° C ~ 35° C) (41° F ~ 95° F) |
3 | Operational temperature range | |
4 | Driving system | Step motor, 2 pieces |
5 | Display system |
|
| Time | Hour, minute and second hands |
| Date | Displayed in numerals. |
| Stopwatch | Hour, minute, second and 1/10 second hands |
|
| The stopwatch measures up to 12 hours, 6 minutes |
|
| and 12.2 seconds in 1/10 second increments. |
6 | Additional function | Energy depletion forewarning function and overcharge |
|
| prevention function |
7 | Duration of charge |
|
| Full charge | Approximately 1 month (if the stopwatch is used for |
|
| less than 3 hours a day) |
| After the second hand starts moving |
|
| at | Approximately 12 hours (if the stopwatch is not used) |
8 | KINETIC electricity storage unit | Button type, 1 piece |
9 | IC (Integrated Circuit) |
* The specifications are subject to change without prior notice for product improvement.
14