Manual power save function

English

The power save function can be activated manually. If you decide not to use the watch for a long time, use this function to further conserve energy.

*While the second hand is moving at two-second intervals, the power save function cannot be activated manually. In this case, charge the watch referring to “ENERGY DEPLETION FOREWARNING FUNCTION”, and then, follow the procedure below.

CROWN Pull out to the first click.

➠	* Pull out and push in within one second.
▼

➠	Push in to the normal position.
	Push in to the normal position.
	* The hands will stop as the power save function
	is activated.

Note: If your watch has a screw lock type crown, turn the crown counterclockwise to unscrew it, and then, pull it out. After using the crown, push it back in to the normal position, and then, turn it clockwise to screw it in completely.

Caution:

Do not pull out the crown to the second click while the power save function is in operation. Otherwise, it is turned off, and the time data retained inside the watch will be erased, thus disabling the time relay function.