Stopwatch History Mode Display | Tech4o Altimeter Watch specification

proceed to the next available stopwatch to begin recording another set of times following the steps above. [ Note that there are 5 available stopwatches]. More stopwatch information can be recorded by clearing stopwatch data in the stopwatch history mode or by recording over stopwatch #5.

6.0 Stopwatch History Mode - Display

The Stopwatch History mode allows you to

access and view data at the end of an event.

• To access the stopwatch history mode,

press the [o/-] button 4 times while in time/ date mode.

• When the stopwatch history mode is selected the watch will display St HSt on the top row and either the current home

time, or temperature depending on your selection .

6.1 Stopwatch History Mode - Navigating Saved Data

How to retrieve saved stopwatch information:

•To view saved stopwatch information, press the [o/o] button in stopwatch history mode to view the desired history log [St1, St2…].

•Press the [o/-] button to confirm and view the desired data.

•Continue pressing the [o/-] button to scroll through the different lap/int times for that stopwatch log.

•Press the [o/o] button any time to view a different stopwatch log.

•To clear all saved stopwatch data, press and hold the [s/+] button while selecting a stopwatch log to view.

7.0Alternate Time Zone Mode - Display

• To view the alternate time zone display, press the [o/-] button 5 times while in time/date mode.

• When the alternate time zone mode is selected the watch will display the alternate time zone time in the top row and the home time in the bottom row.