Extended Warranty, Time, Stopwatch | Timex 143-095004 instruction

Register your product at

www.timex.com

W-212143-095004 NA

THANK YOU FOR PURCHASING YOUR TIMEX¨ WATCH.

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

Please read instructions carefully to understand how to operate your Timex¨ watch. Your model may not have all of the features described in this booklet.FEATURES AND BASIC

OPERA

FEATURES AND BASIC OPERATION

¥Time with 12- or 24-hour format

¥Day and date

¥2nd time zone

¥Optional hourly chime

¥24-hour stopwatch

¥24-hour countdown timer

¥Daily alarm

¥INDIGLO¨ night-light

Press MODE repeatedly to step through modes: Time, Stopwatch (SP), Alarm (AL), Timer (TR), and Time 2 (T2). Press MODE to exit current mode and return to Time mode.

	SET	START/STOP
	SET	(INCREASE VALUE)
	(DONE)	(INCREASE VALUE)
	(DONE)
	MODE
	(NEXT STEP)	INDIGLO¨ BUTTON

Button functions shown with setting functions in parentheses

TIME

To set time and date:

1)With time and date showing, press SET and hold for 2 seconds.

2)Seconds ßash. Press START/STOP to round time to nearest minute, setting seconds to zero.

3)Press MODE. Hour ßashes. Press START/STOP to change hour, including AM (no symbol) and PM.

4)Press MODE. Minutes ßash. Press START/STOP to change minutes; hold button to scan values.

5)Press MODE. Month ßashes. Press START/STOP to change month.

6)Press MODE. Date ßashes. Press START/STOP to change date.

7)Press MODE. Day ßashes. Press START/STOP to change day.

8)Press MODE. Time format ßashes. Press START/STOP to select 12- or 24-hour time format. 12-hour format has AM/PM.

9)Press SET, at any step, to exit and save settings.

Date (day of month) appears in upper part of display in Time mode. Press and hold START/STOP to see month and date in large digits.

STOPWATCH

This mode provides a stopwatch function for timing events. Press MODE repeatedly until SP appears.

To start, press START/STOP. Stopwatch counts up by hundredths of a second up to 30 minutes, then by seconds up to 24 hours before starting over. Day of week indicators cycle forward and runners icon M or m ßashes to indicate stopwatch is running.

To stop, press START/STOP. Runners icon freezes to indicate stopwatch is stopped. To resume, press START/STOP, or to reset (clear) stopwatch, press SET.

While stopwatch is running, press SET to take lap/split and see your time up to that point. Display freezes while stopwatch continues to run. Press SET to resume display of running stopwatch.

Stopwatch continues to run if you exit mode. Runners icon ßashes in all modes.

ALARM

Watch has a daily alarm. Press MODE repeatedly until AL appears.

To set alarm:

1)Press SET and hold for 2 seconds. Hour ßashes. Press START/STOP to change hour, including AM (no symbol) and PM.

2)Press MODE. Minutes ßash. Press START/STOP to change minutes; hold button to scan values.

3)Press MODE. Time zone ßashes. Press START/STOP to select whether alarm is referenced to time shown in Time mode (t1) or Time 2 (t2).

4)Press SET, at any step, when done setting.

To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings. Bell icon b or ALARM or ALM appears when alarm is on. CHIME or CH appears when hourly chime is on Ð watch will chime on every hour.

When alarm sounds, press any button to silence. If no button is pressed, alarm will sound for 20 seconds. If watch is in Time mode, alarm display will pop up for duration of alert.

Alarm repeats daily unless turned off.

TIMER

This mode provides a countdown timer with alert. Press MODE repeatedly until TR appears. To set countdown time:

1)Press SET and hold for 2 seconds. Hours ßash. Press START/STOP to change hours; hold button to scan values.

2)Press MODE. Minutes ßash. Press START/STOP to change minutes.

3)Press MODE. Seconds ßash. Press START/STOP to change seconds.

4)Press SET, at any step, when done setting.

To start timer, press START/STOP. Day of week indicators cycle backward and timer icon T or TR ßashes to indicate timer is running.

To pause countdown, press START/STOP. Timer icon freezes to indicate timer is stopped.

To resume countdown, press START/STOP, or to reset and set countdown, press SET and hold for 2 seconds.

When countdown is within 10 seconds of completion, watch beeps once every second. Watch beeps repeatedly when countdown ends (timer reaches zero). Press any button to silence. Press SET to reset and set countdown.

Timer continues to run if you exit mode. Timer icon ßashes in all modes.

When countdown is done, timer display will pop up in Time mode for duration of alert.