ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench
NOTE: It is strongly recommended two or more people assembling this equipment to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Place the Cross Brace (#1) in between the Left & Right Upright Beams (#2 & #3). B.) Secure each end with three M10 x 3” Allen Bolts (#15), two Brackets (#5), six Ø ¾”
Washers (#14), and three M10 Aircraft Nuts (#13). Do not tighten the Nuts and Bolts yet.
DIAGRAM 1
5