Impex MWB-544 manual See Diagram

Page 8

STEP 4 (SEE DIAGRAM 4)

A.) Attach the hole-side of the Backrest Supports (#28) onto both ends of the Pivot on the Main Seat Support (#32). The other side rest against the Backrest Adjustment Bar (#10).

B.) Place the Backrest Board (#33) onto the Backrest Support (#28). Fasten it with four M6 x 1 3/8” Bolts (#31) and ½” Washers (#30).

C.) Place Seat Cushion (#34) onto the bracket on the Main Seat Support (#32). Align the holes and fasten the Seat with four M6 x 1 3/8” Bolts (#31) and ½” Washers (#30).

D.) Insert the Arm Curl Stand (#44) into the opening on the top of the Front Stabilizer (#49). Secure it with a Knob Bolt (#41).

E.) Attach the Arm Curl Pad (#35) to the Arm Curl Stand (#44). Secure it with two M8 x 5/8” Bolts (#27) and ¾” Washers (#37).

DIAGRAM 4

7

Image 8
Contents Marcy Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Page Assembly Instruction See Diagram See Diagram See Diagram Page Parts List Impex INC