IMPORTANT ASSEMBLY INFORMATION
Tools required for assembling the equipment: two adjustable wrenches and allen wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to be assembled.
Always wait until all bolts are assembled onto the equipment before tightening the bolts. Do not fasten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all components have been assembled in current and previous steps.
NOTE: Do not over tighten any component with pivotal function.
Make sure all pivotal components are able to move freely.
Do not tighten all Nuts and Bolts in this step.
Seat Support (Part# 17) Assembly |
|
The pivot on Seat Support needs to face | upward |
when assembling the Seat Support. |
|
©IMPEX INC. | 6 |