Impex MCB-5693 manual Diagram

STEP 3 (See Diagram 3)

A.) Attach the side-holes on the end of the Backrest Supports (#11) to the pivot on the Main Seat Support (#4). Secure them together with one M12 x 7 ¼” Hex Bolt (#43), two ∅ 1” Washers (#40) and one M12 Aircraft Nut (#51).

B.) Attach the Backrest Board (#13) to the Backrest Supports. Secure it with four M8 x 1 ½” Allen Bolts (#47) and Ø 5/8” Washers (#38). Place the other end of Backrest Board rest against the Backrest Adjustment Bar.

C.) Attach the two Seat Brackets (#6) onto the Main Seat Support. Secure each Seat Bracket with one M10 x 2 ½” Allen Bolts (#44), two Ø ¾” Washers (#39), and one M10 Aircraft Nut (#50).

D.) Place the Seat Pad (#14) onto the Seat Brackets. Secure it with four M8 x 1 ½” Allen Bolts (#47) and Ø 5/8” Washers (#38).

DIAGRAM 3