JVC VS-DT6/VS-DT8 manual Using the Timers, Setting the Clock

Using the Timers

STANDBY/ON

1 2 3

PLAY MODE

4 5 6

REPEAT

7 8 9

FM MODE

10 +10

BASS TREBLE

ON time, OFF time, Source, Volume

SET

SET

MD/AUX CANCEL

SLEEP Timer indicator

FM/AM DISPLAY DIMMER SLEEP

SLEEP SLEEP indicator

AHB PRO

CLOCK OPEN/

COLOR /TIMER CLOSE

CLOCK /TIMER

VOLUME

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The timers let you control listening functions automatically.

Setting the Clock

(Using the Remote Control)

•When you plug the AC power cord into the wall outlet, the time indication “AM 12:00” blinks on the display.

4 Press the SET button.

The minute digits of the time indication rapidly blink on the display.

5 Press the ¢ or 4 button to set the minute.

6 Press the SET button.

• The clock must be correctly set for the timers to work.

The selected time is set and the seconds start counting from 0.

1Press the % button.

CLOCK	CLOCK
/TIMER	/TIMER

2 Press the CLOCK/TIMER button on the Remote Control.

CAUTION:

•If there is a power failure, the clock loses its setting after about 20 minutes. “AM 12:00” blinks on the display and the clock must be reset.

•The clock may gain or lose one to two minutes per month.

•The or button operates same as the ¢ or 4

button does.

The hour digit of the time indication rapidly blinks on the display.

3 Press the ¢ or 4 button on the

Remote Control to set the hour.

Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Hold down the button to move the time rapidly.

22