ASSEMBLY INSTRUCTION
Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Connect the Rear Upright Beams (#1) by a Cross Brace (#5) in the |
| holes and secure them with one Triangle Bracket (#12), one Bent Bracket (#13), two |
| M10 x 3 ½” Carriage Bolts (#34), two M10 x 2 3/8” Carriage Bolts (#36), four ∅ ¾” |
| Washers (#43), and four M10 Aircraft Nuts (#42) on each end of the Cross Brace. |
B.) | Attach the Front Stabilizer (#2) to the front of the Main Seat Support (#3). Secure it with |
| one M10 x 2 ½” Carriage Bolt (#47), two M10 x 2 ¾” Carriage Bolts (#35), ∅ ¾” |
| Washers (#43), and M10 Aircraft Nuts (#42). |
C.) | Attach the back of the Main Seat Support (#3) to the Cross Brace (#5). Secure it with |
| one Bracket (#14), two M10 x 2 3/8” Carriage Bolts (#36), ∅ ¾” Washers (#43), and |
| M10 Aircraft Nuts (#42). |
D.) | Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with |
| two Lock Knobs (#33) through selected holes to obtain desired height of the Supports. |
E.) | Place Backrest Adjustment Bar (#8) between the two Upright Beams on the selected bar |
| holder to obtain desired incline of Backrest. |
| DIAGRAM 1 |
4